<b>Kağıt Geri Dönüşümünde Enzim ve Ultrasonik Enerji Kullanımı</b> / Use of Enzyme and Ultrasonic Energy in Paper Recycling
DOI:
https://doi.org/10.7596/taksad.v1i4.127Keywords:
Kağıt geridönüşüm, lazer baskılar, enzim, ultrasonik enerji, çevre, Paper recycling, laser printings, enzymes, ultrasonic energy, environment.Abstract
Medeniyetin kurulmasında, bilgi depolama ve aktarımında tartışmasız bir yeri olan kâğıt, günümüzde artık çok çeşitli amaçlar için hayatın her kademesinde yer almakta, giderek tüketimi inanılmaz boyutlara ulaşmaktadır. Kâğıt sektöründe hammadde problemine çözüm için, sürdürülebilir ormancılık çalışmalarından daha ziyade, sürdürülebilir geri dönüşüm teknolojilerini geliştirmek gerekmektedir. Bu anlamda atık sınıfına giren kâğıtın, lifler dışında bulunan bütün bileşenlerini en ekonomik ve çevreci metotlarla ayırmak son derece önemlidir. Bu çalışmada, toner baskılı ofis kâğıtlarının mürekkep ve kirliliklerinden arındırılmasında enzim ve ultrasonik enerji kullanımı konusunda elde edilen bazı sonuçlar tartışılmış ve geri dönüşüm açısından kâğıt sektörü çevresel açıdan irdelenmiştir. Use of Enzyme and Ultrasonic Energy in Paper Recycling Paper has undeniable key roles in establishing civilization, archiving and transferring knowledge. Paper is in all parts of daily life for different purposes today and its consumption is getting at unbelievable level. For solving the problems related to insufficient raw materials, the sustainable recycling technologies should be developed rather than concentrating on sustainable forestry practices. In this sense, extracting all materials from waste papers with economical and environmentally friendly methods are extremely important. In this study, some results obtained from an experimental study carried out on the deinking of toner printed office papers with the help of enzymes and ultrasonic energy were discussed and paper industry was examined in respect to recycling and environment.References
Aydemir, C., Özakkun, Ş.C. 2008. Matbaa Malzeme Bilgisi: ISBN: 978-975-400-314-7.
Marmara Üniversitesi Yayını, Đstanbul-Türkiye.
Bajpai, P., Bajpai, P.K. 1998. Deinking with Enzymes, A Review: TAPPI Journal, vol 81
(12): 111-117.
Büyükgüner, M. 2012. Ultrasonic Enerji ve Parça Temizliğinde Ultrasonic Yıkama
Metotları, URL (erişim tarihi 01.04.2012) http:// everestultrasonic.com.
Costa, C.A. and Rubio, J. 2005. Deinking Flotation: Influence of Calcium Soap and
Surface-Active Substances. Minerals Engineering, 18: 59-64.
Diesen, M. 1998. Economics of The Pulp And Paper Industry. In: Papermaking Science
and Technology Series, Book 1. Published In Cooperation with The Finnish Paper
Engineers Association and TAPPI, Helsinki, 186.
Elegir, G., Berri, M. 1996, Proceedings of the Fourth European Workshop on
Lignocellulosic and Pulp, Advances in Characterization and Processing of Wood,
Non-wood and secondary Fibers: Stazione Sperimentale Cellulosa Carta Tessili Eds.,
Stresa, Italy 1996, 538.
Elegir, G., Panizza, E., and Canetti, M. 2000. Neutral Enzyme Assısted Deınkıng of
Xerographıc Offıce Waste Wıth A Cellulase/Amylase Mıxture: TAPPI Journal Peer
Reviewed Paper, 183: 11-71.
Ferguson, L.D. 1992. Deinking Chemistry: Part 2. Tappi J., 75 (8): 49-57.
Heise, O. U., Unwin, J. P., Klungness, J. H., Fineran, W.G., Syekes, J.R. M., Abubakr, S.
Industrial Scaleup of Enzyme-Enhanced Deinking of Nonimpact Printed
Toners: TAPPI Journal, 79 (3): 207-212.
INGEDE Test Method 1. 2007. Test Sheet Preparation from Deinked Pulp for
Measurement of Optical Characteristics, International Association of the
Deinking Industry.
INGEDE Test Method 11. 2007. Assessment of Print Product Recyclability -Deinkability
Test, International Association of The Deinking Industry.
INGEDE Test Method 2. 2007. Measurement of Optical Characteristics of Pulp and
Filtrates From Deinking Process, International Association of the Deinking
Industry.
Đmamoğlu, S. ve Kayacan, B. 2002. Kâğıt Endüstrisinde Lifsel Hammadde Kullanımı ve
Orman Kaynakları Yönetimi: II. Ulusal Karadeniz Ormancılık Kongresi, 15-16
Mayıs, Artvin.
Đmamoğlu, S., 2002. Atık Kâğıt Hamurlarının Formamaidin Sülfinik Asit (FAS) ile
Ağartılması. Doktora Tezi. Đstanbul Üniversitesi, Đstanbul.
Đmamoğlu, S., Kırcı, H., Atik, C., Karademir, A., Aydemir, C., Peşman, E. 2009. Ofis
Kâğıtları Üzerine Ofset Baskı Makinesinde Basılan CMYK Renk Sistemine Ait
Zemin Baskı Mürekkeplerinin Flotasyon Esaslı Sistemle Giderilmesi: Tübitak
Kariyer, Proje No:106M292.
Jeffries, T.W., Klungness, J.H., Sykes, M.S., and Cropsey, K.R.R. 1994. Comparison of
Enzyme-Enhanced with Conventional Deinking of Xerografic and Laser-Printed
Paper: TAPPI Journal, 77 (4): 173-179.
Karademir (a), A., Akgül, M., Tutuş, M. 2002. Kâğıt Endüstrisinde Enzim Kullanımına
Genel Bir Bakış, Enzimlerin Kabuk Soyma, Liflerin Modifikasyonu, Çözünebilir
Kâğıt Hamuru ve Selüloz Üretiminde Kullanımı: KSU Fen ve Mühendislik Dergisi,
: 61-71.
Karademir, A., Đmamoğlu, S. Tutuş, A. 2002. Situation of paper based waste in Turkey. In:
Appropriate Environmental and Solid Waste Management and Technologies for
Developing Countries: vol 1, edited by G. Kocasoy, ISWA International Congress,
Đstanbul, 419-426.
Kırcı, H. 2000. Atık Kâğıt Geri Kazanma Teknolojisi, KTÜ Basımevi, Trabzon.
Kırcı, H. 2006. Kâğıt Hamuru Endüstrisi Ders Notları: KTÜ Yayın, No 86, Trabzon.
Lee, C.K., Darah, I., Ibrahim, C.O. 2007. Enzymatic Deinking of Laser Printed Office
Waste Papers, Some Governing Parameters on Deinking Efficiency: Bioresource
Techonology, 98: 1684-1689.
Mckinney, R.W.J., 1995. Wastepaper Preparation and Contaminant Removal: In
Technology of Paper Recycling, Ed. McKinney, R.W.J., Blackie Academic and
Professional Publication, London, 48-124.
Morkbak, A. L., and Zimmerman, W. 1998, Deinking of mixed office wastepaper, old
newspaper and vegetable oil based ink printed paper using cellulases, xylanases and
lipases: Prog. Paper Recycling, 7: 14-21.
Peşman, E. 2010. Atık Gazete ve Magazin Kâğıtlarının Mürekkep Uzaklaştırma ve
Ağartma Özelliklerinin Belirlenmesi. Doktora Tezi. Karadeniz Teknik Üniversitesi,
Trabzon.
Prasad, Y., Heitman, J., Joyce, T. 1992. Enzyme deinking of black and white letterpress
printed newsprint waste: Prog. Paper Recyc. l (3): 21.
Qin, M., Gao, P., Yinbo, Q., Fu, Y., Shao, Z., and Quan, W. 1998. Physical characteristics
of enzymatically modified fibers from old newsprint: In: Proc. Int. Symp. Emerging
Techno, in Pulping Papermaking Fast-Grow Wood, 462-473.
SKV. 2010. Selüloz ve Kâğıt Vakfı. Rapor, http://skv.org/tr/turkkagıt.
Sreenath, H.K., Yang, V.W., Burdsall, H., Jefferies, T.W. 1996. Toner Removal by
Alkaline Active Cellulases from Desert Basidiomycetes In, Enzymes for pulp and
paper Processing: American Chemical Society, 207–219.
Sreenath, H.K., Yang, V.W., Burdsall, H., Jefferies, T.W. 1996. Toner Removal by
Alkaline Active Cellulases from Desert Basidiomycetes In, Enzymes for pulp and
paper Processing: American Chemical Society, 207–219.
Suslick, K.S., 1989, The Chemical Effects of Ultrasound: Scientific American, (2) 260: 80-
Tappi T 404 om-87, 1992. Tensile Breaking Strength and Elongation of Paper and
Paperboard (using pendulum-type tester) Tappi Test Methods, Tappi Pres,
Atlanta, 2.
Teander, K., Pugh, R. 2004. Surface Chemicals Concepts of Flotation De-Inking: Colloids
and Surfaces, 240: 111-130.
Viestures, U., and Leitte, M. 1999. Pulp and waste paper bleaching using xylanases and
other enzymatic complexes In. Latvian State Institute of Wood Chemistry Year
Book, 49-50.
Yılgör, N., Cameron, J., Velpumadugu, A., Kumar, K. 2009. Enzymatic Deinking of Inkjet
Printed Papers: TAPPI Engineering, Pulping & Environmental Conference, Oktober
–14, Memphis, Tennessee, 1-14.
Zollner, H. K. and Schroeder, L.R., 1998. Enzymatic Deinking of Nonimpact Printed
White Office Paper with α-amylase: TAPPI J., 81 (3): 166-170.
Downloads
Published
How to Cite
Issue
Section
License
All papers licensed under Creative Commons 4.0 CC-BY.- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.